"tight lockup, no slop & sturdy. Does the job it says it does extremely well."

"Fits perfectly, quality materials and quality finish highly recommend this mount for Liberty or Justice red dot sights."

"Excellent product and accessories"

"what can i say? it’s solid, Justice and Liberty have to be pressed on lightly by hand. no slop whatsoever. solid on the rail as well."

"Shipping was in a timely manner, and I like the quality of the product"

"Perfect as usual. Easily installed, works great..."

"Well made and a great value. I would recommend making one that is about .250 inches taller to better allow for viewing the dot in the center of the window when mounted on an ar15 platform. This height places the dot very high in the window and requires an exaggerated cheek weld to be able to use the dot."

"I like the style, I don't like mounts with big nuts on the side. I have Swampfox products and would give them all 5 stars."

"Works great stays tight. Mad of aluminum so it's easy to alter and cut for fitment I have it mounted on an M1A. Works great. "

"The fit and finish are amazing and was able to mount my Liberty to my shotgun. I only wish the pins were long enough for me to keep the Ironside Shield also. "

"Purchased this pic rail mount for an optic mounting solution on a mossberg 500 ive built. The mount has an amazing finish on it, feels like complete quality, and worked out perfect for my RMR footprint needs. One of the best features on the mount is the dual mounting screws for the pic rail mount itself. This thing mounts up solid! Most of the other mounts i was considering only mount to the rail using a single screw. No corners cut by swampfox here at all. And best of all at the price point i can afford to buy several for other platforms. Great product!"

"Liberty and picatinny mount. LOVE this combo on my Henry lever action .22! Very fast sight acquisition and dead nuts accuracy!"

"Does it job and does it well. Does wonders for my 870."

"Are use the liberty optic with the Picatinny mount base on a Ruger mark 422 pistol with the Ruger Picatinny rail. Outstanding! Would have preferred the Sentinel site, but it does not have a picatinny base. How about one, Swampfox?"

"Mount worked perfectly and was easy to use I recamend"

"Mount arrived in specified amount of time. Well made, fit my Liberty optic perfectly and mounted on my 10/22 without issue, Great upgrade for my rifle!!"

"Bought this so I can fit my Justice red dot on a long gun"

"Everything fit perfect on my S&W TRR8 revolver. Had to use the short screws as the longer screws would not go all the down in the mount, although there was still plenty of room before bottoming out."

"Everything I was looking for. A sharp looking, compact sized, really solid mount for the Holosun HS507C X2 reflex sight at a really reasonable price, Far, far exceeded my expectations:. Luv it! Nothing comparable on the market AFAICS.."

"I was looking for a well built mount to add Holosun 509t red dots to my Benelli M4 and Remington Tac13 and this fit the bill perfectly. High quality and sturdy, this mount gave me the perfect uheight that I wanted, and at a very attractive price. I will definitely be coming back to Swampfox to check out their other products."

"Works like a charm. Mounted the red dot on a Marlin 336 and love it."

"Ordered this to mount a Justice on. Perfect fit and finish. I work a gun shop and see a lot of parts folks bring in that aren't worth half the money they paid for them. Swampfox has solid products and would reccomend."

"The 1913 Picatinny RMR mount is a solid value mount for putting the Justice on a PCC or shotgun. However it is worth noting it is VERY low profile . . . so low that I have to really press my cheek weld to bring my eye in line with the dot. Would be nice to have something a little taller (not necessarily co witness height)"

"Luv the height/advantage it gives you for cheek well. Very good quality. Looks awesome w/red dot and shield. Looks awesome on my 930spx"

"Installed a Holosun 407c RDS on a 10/22 that has a Pic rail. Since Holosun no longer has the RMR to Pic rail mount and Swampfox does, went ahead and did the deed. Pleased w fit and finish, and twin bolts inspire confidence. "

"Low profile and works better than what I had on their previously."

"Quality mount. Got it as a backup if I swapped the Justice sight from my shotgun to my AR-15."

"I like it I just feel as if I need the taller one, and I brought it two days before they released it so feels bad man"

"This is a quality picantinny mount for the Swamp Fox Justice red dot. A clean fit and secure mount to my Ruger 22/45 Picatinny rail. Easy install too. I am pleased."

"Not too high. Does what it’s supposed to."

"Great fit and finish everything worked for how it is designed simple to install great shipping i’ll definitely be back to buy more"

"This is perfect for the justice and other dot sights that has the same footprint."

"Easy installation quality product. The pic mount for justice is a great addition to anyone that likes choices when it comes to thier optics do you want it on a pcc, pistol, shotgun or a rifle adding this to your optic allows all this and more the only down side I have noticed with this product is when adding Ironsides to your optic all ontop this mount doesn't leave much surface on the 2 pegs for the optic to snap into my suggestion would be for them to include slightly longer pegs on the mount then it would be perfect"

"Excellent fit and quality"

"Picatinny mount was perfect."

"Tight fit, well built, red dot holds firm, A must have if planning to install the red dot on a rifle."

"This mount is the most solid pic rail mount I’ve ever used"

"They work perfect on my MK IV 22lr for speed steel."

"I absolutely love your products some of the best I've ever used. I use them on my pistols, ARS, and on my shotguns. I would like to see a dovetail mount for your liberty and justice red dots though that would be really nice something compatible with a Glock other than that you can't beat your products."

"This was a perfect low-profile mount for my Kraken. My Kingslayer originally came with the mount but needed it for my new build with the Kraken. I ordered a new one to put back on my shotgun with my Kingslayer. Overall, the mount is relatively inexpensive and works perfectly on Picatinny rails and RMR footprint optics."

"Have been looking for one for some time. Good quality, works as designed. Installed in minutes. Love it. Will be exploring other products now."

"Simple, Strong, Superbly priced!"

"Best quality for my hog legs"

"Fits great on my cz scorpion EVO. I actually bought the liberty green dot for my Springfield xdm elite 3.8 compact but it's too wide so I mounted it on my cz scorpion this is why I got the picatinny mount. I like the setup it was easy to zero"

"Perfect mount for attaching a Liberty or Justice to the picatinny rail on a rifle or shotgun. Top quality!"

"It is what it is, and gets the job done. I'm using this on my Henry X model with the Kraken. Great minimalist setup."

"Good quality and fit perfectly, I just wish it was taller."

"Excellent product, used it to mount my Justice on my GP100"

"Uses the RMR foot print which is really nice. I have it on my cz scorpion pistol version. You can use your iron sight but if you go to a C clamp grip your thumb will block your view so if you’re thinking this is what you need it might not work I’d recommend the red dot riser. Wish I got that instead but this still gets the job done."